Suzhou Saimr Electronics Technology Co., Ltd.
Innovation leads technology and changes the world
Add to Cart
1.DESCRITION
The SAIMR5000 can be customized into a transient breaking tester.Transient breaking tester is a special instrument used to monitor whether the wires and components connected by electrical connectors will suddenly experience instantaneous circuit breaking during dynamic load environmental tests such as vibration, impact, and collision. The transient breaking tester can detect the location and time of the transient breaking, and is used to determine the contact reliability of wires, connectors and other components during dynamic use.
2.USAGE
3.Specification
| Low Voltage test | SAIMR5000 | |
| Test Mode | Four- wire or 2-wire (mixed test) | |
| Number of Points | 128/256/512/1024…20480 | |
| Test Project | Test Range | Test Accuracy |
| OS Test (Voltage 5V) | 2 kΩ -200 kΩ (optional 20 KΩ -1000 KΩ) | ±5% |
| Insulation Resistance Test | 1MΩ-10 GΩ(30V-1500V) | 1MΩ~100MΩ: ±2% |
| 100MΩ~ 1GΩ: ±5% | ||
| 1GΩ~ 10GΩ: ±10% | ||
| DC Resistance Test | 0.1Ω-1MΩ | <100k: ±1% |
| >100k: ±5% | ||
| Internal Four-wire DC Resistance Test | 0.1Ω-1MΩ | ±0.5%+0.05Ω |
| Outer Four-wire DC Resistance Test | 10μΩ~100Ω | ±0.2%+5μΩ |
| Four-wire NTC Test (10k, 100k) | Temperature Judgment (accuracy 0.1°C) | Users can self-defined RT table for resistance and temperature judgment |
| Resistance Judgment (accuracy 10k: 1% 100k: 5%) | The resistance value can be judged according to the real -time temperature of the environment | |
| Comparison Judgment (accuracy 0.1°C) | Maximum resistance difference between tested and standard parts (Range) | |
| AC Hi-pot Test | 30V-1000V | ±3% |
| DC Hi-pot Test | 30V-1500V | ±3% |
| AC Leakage Current Test | 1μA-10mA | ±3% |
| DC Leakage Current Test | 0.1μA-5mA | ±3% |
| LCR Test | Frequency: 50Hz-10 kHz | 100mΩ-20MΩ ±2% |
| Test type: resistance / capacitor / inductance / impedance / conduction / conductance | 10pF-100μF ±2% | |
| Test level: 0.1V-1.5V | 10nH~100H ±2% | |
| Diodes / Zener Diodes | 0-10V | 0.1 mA / 1 mA (test signal) |
| Dimensions (in mm) | 483*265*510 (1024P) | 483*183*510 (512P) |
| Maximum Weight (in kg) | 25 | 17 |
| Standard Configuration | User’s manual in U disk, power cord, network cable, port adapter board, test line, patrol pen. | |
| Optional Configuration | Insulation standard resistance, conduction standard resistance, industrial computer, desktop computer, monitor, mouse, keyboard, speaker. | |
4.